rod mill, which is also called a rod mill, is a device that is used to crush and pulverize all kinds of materials and stones, and it is used in various industries such as ceramics, cement, porcelain, etc. is used
In this type of mill, different materials can be ground by rotating the body and the rods in it. There are cast iron rods inside this mill, and their amount varies according to the size of the mill. But it is usually designed in such a way that the amount of rods can be changed according to the amount of material that is poured into it. In fact, the number of rodmill rods is determined according to the amount of material and the size of the mill.
This industrial mill can pulverize materials with a size of about 4 to 25 mm and their size becomes about half to 2 mm. The diameter and length of the mill must also have a certain size; Because if their size ratio changes and becomes smaller, it will cause the rods to collide and cause problems in the device’s performance.
Also, the rods inside the rodmill must have a certain length and due to their bending, the length of the rods cannot be more than 6 meters. The amount of energy consumed by the device is also determined by its size and the amount of materials that are poured into the device and its rotation speed.
In addition to the rodmill, they use another mill called a ball mill to grind and pulverize materials, and the difference with the rodmill is that in this mill, balls are used to pulverize materials and minerals.
